Aquatic Robotics Garage
-
- Posts: 597
- Joined: Wed Dec 31, 1969 7:00 pm
- Team: Aquatic Robotics
- Contact:
Aquatic Robotics Garage
<big><big><big><big>Feeling Crabby</big></big></big></big>
<big>https://www.tinkercad.com/things/asikd1 ... ing-crabby</big>
Featuring the latest in "What's a corner? Never heard of it." technology, this double-disc vertical spinner is the most aquatic-themed Aquatic Robotics robot in a while. It self-rights by creating large dents in the arena floor
<big>Stats: 5 Speed / 4 Traction / 1 Torque / 6 Armor / 14 Weapon</big>
This is my entry into The New Blood Championship.
<big>https://www.tinkercad.com/things/asikd1 ... ing-crabby</big>
Featuring the latest in "What's a corner? Never heard of it." technology, this double-disc vertical spinner is the most aquatic-themed Aquatic Robotics robot in a while. It self-rights by creating large dents in the arena floor
<big>Stats: 5 Speed / 4 Traction / 1 Torque / 6 Armor / 14 Weapon</big>
This is my entry into The New Blood Championship.
-
- Posts: 2719
- Joined: Wed Dec 31, 1969 7:00 pm
- Team: ‽ Robotics
Aquatic Robotics Garage
<blockquote class='quote_blockquote'><dl><dt>attackfrog</dt><dd>Jul 3 2017, 09:08 PM</dd></dl><div> It self-rights by creating large dents in the arena floor
[/quote]you're paying for a new floor!
[/quote]you're paying for a new floor!
‽ ROBOTICS
CHAMPIONS: Lightweight//Ruination 4//Nick's Fuzzy Rules -- -- Hobbyweight//Bot-o-Rama//Buzzkill -- -- Arbitraryweight//D12//Listen Here, Grandad, This Is America, Everyone Here Eats Ass
Bots that I think are better than my actual champions: Chimera // Venice Queen // Cuddle Time!
V900? Wheres V1-899 ~NickyDustyOwl
fridge ~ V900
Wasn't Ted Bundy physically attractive though? ~Superbomb122
get a room ~Madbull
I will NOT ~Superbomb122
CHAMPIONS: Lightweight//Ruination 4//Nick's Fuzzy Rules -- -- Hobbyweight//Bot-o-Rama//Buzzkill -- -- Arbitraryweight//D12//Listen Here, Grandad, This Is America, Everyone Here Eats Ass
Bots that I think are better than my actual champions: Chimera // Venice Queen // Cuddle Time!
V900? Wheres V1-899 ~NickyDustyOwl
fridge ~ V900
Wasn't Ted Bundy physically attractive though? ~Superbomb122
get a room ~Madbull
I will NOT ~Superbomb122
-
- Posts: 597
- Joined: Wed Dec 31, 1969 7:00 pm
- Team: Aquatic Robotics
- Contact:
Aquatic Robotics Garage
Here it is, my first sawbot! This robot probably took me the longest to design/CAD of any robot I've made except maybe for the original Undertow (my first robot.) Not that it's necessarily going to be any good, of course...
<big><big><big>Obsession</big></big></big>
<big>https://www.tinkercad.com/things/iua92bTGnls-obsession
http://imgur.com/a/90tn0</big>
So what's going on here? The two prongs each have a thick cable running through them connected at one end to the tips of the prongs and at the other to a mechanism that contacts with the saw arm as it lowers. The effect of this is that lowering the saw arm past a certain point puts tension in the cables, which has the effect of curling the hinged tips of the prongs upwards, since the cable is attached to the top side of the prongs rather than at the center (or bottom). Both the white and blue parts of the prongs raise up, ideally lifting whatever I've wedged off the ground.
It's also got a somewhat unique drivetrain. It's 4WD, but the forward set of wheels is shock-mounted as you see above. The travel isn't huge: if an opponent gets under the prongs, they'll likely still be lifted into the air unless the wedge is shallow. Instead, the shocks are there to improve my wedging ability: part of the robot's weight rests on the front wheels and part of it rests on the prongs, putting them somewhere between a hinged wedge and a 2WD wedge in wedging priority (theoretically.)
Now you may be saying "but attackfrog, any spinner is just going to knock those wheels right off!" and you'd be right. Unless, that is, I put on this shield attachment, which mounts to the front of the chassis. Less "dustpan" area, but increased survival.
This was originally going to be my featherweight entry to CBC2, but it looks heavier than that to me. I think I'll swap it with Salad Spinner, as that robot hasn't fought in anything yet and needs some work in any case.
<big><big><big>Obsession</big></big></big>
<big>https://www.tinkercad.com/things/iua92bTGnls-obsession
http://imgur.com/a/90tn0</big>
So what's going on here? The two prongs each have a thick cable running through them connected at one end to the tips of the prongs and at the other to a mechanism that contacts with the saw arm as it lowers. The effect of this is that lowering the saw arm past a certain point puts tension in the cables, which has the effect of curling the hinged tips of the prongs upwards, since the cable is attached to the top side of the prongs rather than at the center (or bottom). Both the white and blue parts of the prongs raise up, ideally lifting whatever I've wedged off the ground.
It's also got a somewhat unique drivetrain. It's 4WD, but the forward set of wheels is shock-mounted as you see above. The travel isn't huge: if an opponent gets under the prongs, they'll likely still be lifted into the air unless the wedge is shallow. Instead, the shocks are there to improve my wedging ability: part of the robot's weight rests on the front wheels and part of it rests on the prongs, putting them somewhere between a hinged wedge and a 2WD wedge in wedging priority (theoretically.)
Now you may be saying "but attackfrog, any spinner is just going to knock those wheels right off!" and you'd be right. Unless, that is, I put on this shield attachment, which mounts to the front of the chassis. Less "dustpan" area, but increased survival.
This was originally going to be my featherweight entry to CBC2, but it looks heavier than that to me. I think I'll swap it with Salad Spinner, as that robot hasn't fought in anything yet and needs some work in any case.
-
- Posts: 2719
- Joined: Wed Dec 31, 1969 7:00 pm
- Team: ‽ Robotics
Aquatic Robotics Garage
very interesting, I'm interested to see how it does
‽ ROBOTICS
CHAMPIONS: Lightweight//Ruination 4//Nick's Fuzzy Rules -- -- Hobbyweight//Bot-o-Rama//Buzzkill -- -- Arbitraryweight//D12//Listen Here, Grandad, This Is America, Everyone Here Eats Ass
Bots that I think are better than my actual champions: Chimera // Venice Queen // Cuddle Time!
V900? Wheres V1-899 ~NickyDustyOwl
fridge ~ V900
Wasn't Ted Bundy physically attractive though? ~Superbomb122
get a room ~Madbull
I will NOT ~Superbomb122
CHAMPIONS: Lightweight//Ruination 4//Nick's Fuzzy Rules -- -- Hobbyweight//Bot-o-Rama//Buzzkill -- -- Arbitraryweight//D12//Listen Here, Grandad, This Is America, Everyone Here Eats Ass
Bots that I think are better than my actual champions: Chimera // Venice Queen // Cuddle Time!
V900? Wheres V1-899 ~NickyDustyOwl
fridge ~ V900
Wasn't Ted Bundy physically attractive though? ~Superbomb122
get a room ~Madbull
I will NOT ~Superbomb122
-
- Posts: 597
- Joined: Wed Dec 31, 1969 7:00 pm
- Team: Aquatic Robotics
- Contact:
Aquatic Robotics Garage
And I came up with another robot, this time in a very short amount of time. I'm swapping out Smooth Criminal for this one in Hobbywham.
<big><big><big>The Juicemaster</big></big></big>
<big>https://www.tinkercad.com/things/eOT5sA ... uicemaster</big>
Apparently there's a real life Juice Master named Jason Vale who would like to sell you on his magical juice only diet which will make you healthier than anyone has ever been before. This has pretty much nothing to do with that except for that it kind of looks like an orange, and orange juice is a thing that people drink.
It's a "melty-brain" spinner with flails on springs and a pair of wedges flopping around on steel rings on the front and back. The springs retract when the robot isn't spinning, reducing their length by about two thirds. As it spins up, the centrifugal force stretches them out until they're whirling around, ready to cause Hellachopper-style devastation.
<big>Stats:</big>
Speed: 13
Traction: 3
Torque: 1
Weapon: 5
Armor: 8
<big><big><big>The Juicemaster</big></big></big>
<big>https://www.tinkercad.com/things/eOT5sA ... uicemaster</big>
Apparently there's a real life Juice Master named Jason Vale who would like to sell you on his magical juice only diet which will make you healthier than anyone has ever been before. This has pretty much nothing to do with that except for that it kind of looks like an orange, and orange juice is a thing that people drink.
It's a "melty-brain" spinner with flails on springs and a pair of wedges flopping around on steel rings on the front and back. The springs retract when the robot isn't spinning, reducing their length by about two thirds. As it spins up, the centrifugal force stretches them out until they're whirling around, ready to cause Hellachopper-style devastation.
<big>Stats:</big>
Speed: 13
Traction: 3
Torque: 1
Weapon: 5
Armor: 8
Last edited by attackfrog on Mon Jul 10, 2017 9:40 pm, edited 1 time in total.
Aquatic Robotics Garage
Obsession looks fucking amazing. Well done.
Juicemaster looks interesting, not sure how it would do in a competition.
Juicemaster looks interesting, not sure how it would do in a competition.
Team Ignition
Redline: Robot Bastards 1 LW champ
Pyrite: FRR Backlash LW champ
The Debilitator: Cherry Bomb Classic 1 LW champ
Sling Shot: Bot O' Rama 2016 Sportsman champ
Doomerang: Robot Fight Night HW champ
Redline: Robot Bastards 1 LW champ
Pyrite: FRR Backlash LW champ
The Debilitator: Cherry Bomb Classic 1 LW champ
Sling Shot: Bot O' Rama 2016 Sportsman champ
Doomerang: Robot Fight Night HW champ
-
- Posts: 597
- Joined: Wed Dec 31, 1969 7:00 pm
- Team: Aquatic Robotics
- Contact:
Aquatic Robotics Garage
Some updates! First, a new robot, in the Hobbyweight class:
<big><big><big>Rogue Wave</big></big></big>
http://imgur.com/a/PmKjq
https://www.tinkercad.com/things/0KTtd6fUesm-rogue-wave
It's a lifting wedge! There are a couple more pictures in the Imgur album of the rear of the robot and of it self-righting.
I'm putting this one in CBC2.
<big><big><big>Rogue Wave</big></big></big>
http://imgur.com/a/PmKjq
https://www.tinkercad.com/things/0KTtd6fUesm-rogue-wave
It's a lifting wedge! There are a couple more pictures in the Imgur album of the rear of the robot and of it self-righting.
I'm putting this one in CBC2.
-
- Posts: 597
- Joined: Wed Dec 31, 1969 7:00 pm
- Team: Aquatic Robotics
- Contact:
Aquatic Robotics Garage
Second, I redrew Undertow IV. I kept the same idea, but the first CAD I did, while detailed, had a bunch of annoying TinkerCAD artifacts that would have been impossible to get rid of. So I just made it from scratch again. I didn't redraw the lifter mechanism because, well, you know what it would look like anyway. And I didn't do the hammer blocker because there are no hammers in the CBC2 heavyweight division. If someone enters one I'll add it back again. Anyway, without further ado, and for the second time:
<big><big><big>Undertow IV</big></big></big>
<big>https://www.tinkercad.com/things/0I8bcP ... ertow-iv-b
http://imgur.com/a/652nr</big>
Once again, your favorite rear-hinged flipper with the armored rear end. The shield is shock-mounted to the chassis, and can be removed if it's not needed in a match.
<big><big><big>Undertow IV</big></big></big>
<big>https://www.tinkercad.com/things/0I8bcP ... ertow-iv-b
http://imgur.com/a/652nr</big>
Once again, your favorite rear-hinged flipper with the armored rear end. The shield is shock-mounted to the chassis, and can be removed if it's not needed in a match.
-
- Posts: 597
- Joined: Wed Dec 31, 1969 7:00 pm
- Team: Aquatic Robotics
- Contact:
Aquatic Robotics Garage
Third, and final update (for now): I made some smaller changes to Mega Frogbot and Salad Spinner.
<big><big>Mega Frogbot</big></big>
<big>http://imgur.com/a/ugb1r
https://www.tinkercad.com/things/laVU87 ... ga-frogbot</big>
Mega Frogbot's now using a hybrid drivetrain: wheels in the back and trackballs up front. Think of it as the robot equivalent of a mullet. This will make it drive closer to a 2WD robot, rotating around the back of the robot, but it will have much better rotational acceleration thanks to the trackballs. And it won't have as many knockback or high-centering issues as before, with full trackballs.
It's still a four-bar flipper with a hinged wedge (the wedge can also be locked in place if needed.)
The album has a picture of the underside as well.
<big><big>Salad Spinner</big></big>
<big>http://imgur.com/a/lt42V
https://www.tinkercad.com/things/9C6rEv ... ad-spinner</big>
The main configuration of Salad Spinner is mostly unchanged: the only difference is that the disc's teeth now alternate between cutting from below and above.
The bigger change is the addition of a second configuration, which uses a much lighter three-bladed propeller in place of the disc. This gets rid of a lot of weight, making Salad Spinner less sluggish to drive and allowing me to swap in some more powerful drive motors.
And there's my CBC2 team! I'm still feeling pretty good about Obsession and Red Menace, so I'm keeping them as they are.
Now I just need to stat these things...
<big><big>Mega Frogbot</big></big>
<big>http://imgur.com/a/ugb1r
https://www.tinkercad.com/things/laVU87 ... ga-frogbot</big>
Mega Frogbot's now using a hybrid drivetrain: wheels in the back and trackballs up front. Think of it as the robot equivalent of a mullet. This will make it drive closer to a 2WD robot, rotating around the back of the robot, but it will have much better rotational acceleration thanks to the trackballs. And it won't have as many knockback or high-centering issues as before, with full trackballs.
It's still a four-bar flipper with a hinged wedge (the wedge can also be locked in place if needed.)
The album has a picture of the underside as well.
<big><big>Salad Spinner</big></big>
<big>http://imgur.com/a/lt42V
https://www.tinkercad.com/things/9C6rEv ... ad-spinner</big>
The main configuration of Salad Spinner is mostly unchanged: the only difference is that the disc's teeth now alternate between cutting from below and above.
The bigger change is the addition of a second configuration, which uses a much lighter three-bladed propeller in place of the disc. This gets rid of a lot of weight, making Salad Spinner less sluggish to drive and allowing me to swap in some more powerful drive motors.
And there's my CBC2 team! I'm still feeling pretty good about Obsession and Red Menace, so I'm keeping them as they are.
Now I just need to stat these things...
-
- Posts: 597
- Joined: Wed Dec 31, 1969 7:00 pm
- Team: Aquatic Robotics
- Contact:
Aquatic Robotics Garage
I couldn't think of any way to make Salad Spinner interesting or at least effective (and the one way I did think of is banned), so it's off the team. Spinners have never really been my thing anyway, to be honest. I'm replacing it with...
<big><big><big>Solomon</big></big></big>
<big>https://www.tinkercad.com/things/6PWwwbym6A2-solomon
http://imgur.com/a/vzyzF</big>
It's gold-plated and covered with (imitation) priceless gems. Big chunky wheels and a good drivetrain, but relatively low armor except in its anti-spinner shield configuration. The shield (and, of course, the wedgelets) are hinged.
<big><big><big>Solomon</big></big></big>
<big>https://www.tinkercad.com/things/6PWwwbym6A2-solomon
http://imgur.com/a/vzyzF</big>
It's gold-plated and covered with (imitation) priceless gems. Big chunky wheels and a good drivetrain, but relatively low armor except in its anti-spinner shield configuration. The shield (and, of course, the wedgelets) are hinged.
Last edited by attackfrog on Mon Aug 07, 2017 6:33 pm, edited 1 time in total.
-
- Posts: 1308
- Joined: Thu May 26, 2016 12:00 am
- Location: Canada, for now
- Team: The Monsterworks
Aquatic Robotics Garage
These renders are looking really sweet, and I love the ideas behind them: Red Menace and Obsession especially. It's good to see another walking turret hammer out there. Mastodon was the last one and it won me a championship, so you're definitely in good company. Either way, I think your team will be a real contender in CBC2.
Mastodon... Extinction (HW)
Osiris... Armageddon! (MW)
Elrathia... ROBOTS (LW)
Magnolia Pico... Ruination 4 (MW)
RipTide... ROBOT2 (FW)
Black Diamond... Cherry Bomb Classic 3 (HW)
MADSCIENCE... ROBOTS 3 (LW)
Abyss... ROBOTS 3 (MW)
The Monsterworks: 214-57 (.790) ...Probably up to no good.
Osiris... Armageddon! (MW)
Elrathia... ROBOTS (LW)
Magnolia Pico... Ruination 4 (MW)
RipTide... ROBOT2 (FW)
Black Diamond... Cherry Bomb Classic 3 (HW)
MADSCIENCE... ROBOTS 3 (LW)
Abyss... ROBOTS 3 (MW)
The Monsterworks: 214-57 (.790) ...Probably up to no good.
Cherry Bomb Classic IV: 25-4
Finishing Move: 6-2
Magnolia Pico: 6-1
Magnolia Grande: 6-1
Glacier III: 7-0
Magnolia Pico: 6-1
Magnolia Grande: 6-1
Glacier III: 7-0
ROBOTS 3: 21-6
Sixpounder: 3-4
MADSCIENCE: 9-1 Champion!
Abyss: 9-1 Champion!
MADSCIENCE: 9-1 Champion!
Abyss: 9-1 Champion!
-
- Posts: 597
- Joined: Wed Dec 31, 1969 7:00 pm
- Team: Aquatic Robotics
- Contact:
Aquatic Robotics Garage
I finally dumped TinkerCAD! I definitely liked how easy it was to use, and you can do a lot with it, but it is all too easy to just end up with a mess. It's also really slow, has very limited color options, and your renders always end up with this annoying blue grid at the bottom. So, bye TinkerCAD! Thanks for the memories! I've switched to Blender. (It's free, and no more complicated that anything else I tried <small>cough Rhino cough</small>).
So to break my two-month streak of no new robots, here's Trident!
It's a lifter: the front piece can be raised up and down by an actuator that comes out of the front of the robot. But what's going on with the three wheels? It looks like it wouldn't be able to turn very well, doesn't it?
But you'd be mistaken to think so: the rear wheel is mounted on a frame that rotates horizontally, so it can be made to point in any direction. If I want to turn in place, the rear wheel turns sideways. If I'm turning in an arc, it would turn at an angle. This makes the robot drive almost exactly like a 2WD robot, as if the rear wheel weren't there, but with extra turning torque and better stability.
Here are some more angles (sorry for the large image sizes, I'll make the smaller next time):
So to break my two-month streak of no new robots, here's Trident!
It's a lifter: the front piece can be raised up and down by an actuator that comes out of the front of the robot. But what's going on with the three wheels? It looks like it wouldn't be able to turn very well, doesn't it?
But you'd be mistaken to think so: the rear wheel is mounted on a frame that rotates horizontally, so it can be made to point in any direction. If I want to turn in place, the rear wheel turns sideways. If I'm turning in an arc, it would turn at an angle. This makes the robot drive almost exactly like a 2WD robot, as if the rear wheel weren't there, but with extra turning torque and better stability.
Here are some more angles (sorry for the large image sizes, I'll make the smaller next time):
-
- Posts: 2719
- Joined: Wed Dec 31, 1969 7:00 pm
- Team: ‽ Robotics
Aquatic Robotics Garage
that's a fuckin clean render man, nicely done
‽ ROBOTICS
CHAMPIONS: Lightweight//Ruination 4//Nick's Fuzzy Rules -- -- Hobbyweight//Bot-o-Rama//Buzzkill -- -- Arbitraryweight//D12//Listen Here, Grandad, This Is America, Everyone Here Eats Ass
Bots that I think are better than my actual champions: Chimera // Venice Queen // Cuddle Time!
V900? Wheres V1-899 ~NickyDustyOwl
fridge ~ V900
Wasn't Ted Bundy physically attractive though? ~Superbomb122
get a room ~Madbull
I will NOT ~Superbomb122
CHAMPIONS: Lightweight//Ruination 4//Nick's Fuzzy Rules -- -- Hobbyweight//Bot-o-Rama//Buzzkill -- -- Arbitraryweight//D12//Listen Here, Grandad, This Is America, Everyone Here Eats Ass
Bots that I think are better than my actual champions: Chimera // Venice Queen // Cuddle Time!
V900? Wheres V1-899 ~NickyDustyOwl
fridge ~ V900
Wasn't Ted Bundy physically attractive though? ~Superbomb122
get a room ~Madbull
I will NOT ~Superbomb122
-
- Posts: 9125
- Joined: Wed Dec 31, 1969 7:00 pm
- Location: Canada
- Team: Dissonance-Tek
-
- Posts: 462
- Joined: Wed Dec 31, 1969 7:00 pm
- Location: Rochester, New York
- Team: Team Foxtrot Uniform
Aquatic Robotics Garage
rad af
winter! she/they/it pronouns, trans rights babey!
ROBOT FIGHT NIGHT: MINI
Break Dash - 1-1
Neophyte Redglare - 1-1
Neophyte Redglare - Robot Fight Night: Season 1 Quarter-Finals, Cherry Bomb Classic 3 Quarter-Finals
America Offline - Robot Fight Night: Season 1 Quarter-Finals
"I'm curious what tactical advantage you're hoping to gain by sacrificing a portion of your bots size/weight for a deployable banana"
-NWOWWE, 2017