The Crash & Burn Tournament 5

Find all your ARC RPGs and fantasy leagues discussed here. We're good at this stuff.

Moderator: Tournament Hosts

Locked
User avatar
Badnik96
Posts: 3983
Joined: Sun May 02, 2010 12:00 am
Location: somewhere in the plane of existence
Contact:

The Crash & Burn Tournament 5

Post by Badnik96 » Thu Apr 04, 2013 1:29 pm

OK:

For my AW I'll use my in-progress IRL ant FireArrow. I should be able to easily get stats up for this, only problem would be converting the dimensions to fit into a 4cm cube.

I'll use Explosion (the real-life robot) for my featherweight if that's OK.

For my lightweight I'll probably use SNK.

My middleweight will be a realie: The Mortician.

Heavyweights will be WhipCoil 4, FrostByte, a new wedge bot and another realie in Preda Raptor.

Superheavyweight will be the newest Phantasmic Slammer.

Kody, I'll message you on skype if I need help with my stats
Team Ignition
Redline: Robot Bastards 1 LW champ
Pyrite: FRR Backlash LW champ
The Debilitator: Cherry Bomb Classic 1 LW champ
Sling Shot: Bot O' Rama 2016 Sportsman champ
Doomerang: Robot Fight Night HW champ

User avatar
That Kode Guy
Posts: 9125
Joined: Wed Dec 31, 1969 7:00 pm
Location: Canada
Team: Dissonance-Tek

The Crash & Burn Tournament 5

Post by That Kode Guy » Thu Apr 04, 2013 1:31 pm

No problem. However right now I'm at the Science Centre (if you have me on Facebook, I just posted on Facebook about it, by the way! Hey. :cool: ) so I can't do it right now. However, maybe later on today. :)
This account is in a state of dimensional flux

NWOWWE
Posts: 6889
Joined: Wed Dec 31, 1969 7:00 pm
Location: E-Town, PA
Team: Team Blood Gulch
Contact:

The Crash & Burn Tournament 5

Post by NWOWWE » Thu Apr 04, 2013 2:53 pm

<blockquote class='quote_blockquote'><dl><dt>Badnik96</dt><dd>Jan 11 2013&#44; 03:44 PM</dd></dl><div> I think GROSS (AKA Mean Green Mother from Outer Space) would do better than Hector would in Ruination XD [/quote]
Quoted for laughs. :lol:

Given how well Hector ended up doing, G.R.O.S.S. better clownstomp everything. :v:
Area51Escapee,Jan 30 2011 wrote:
Spatula,Jan 29 2011 wrote: I should go 3-1 this week but it'll probably be something like 0-4 or 0-5.
It sucks going 0-5. You lose all 4 of your bot fights for the week and you also lose at life.

User avatar
Badnik96
Posts: 3983
Joined: Sun May 02, 2010 12:00 am
Location: somewhere in the plane of existence
Contact:

The Crash & Burn Tournament 5

Post by Badnik96 » Thu Apr 04, 2013 2:57 pm

Lol I just noticed I said that when I was reading through the thread again.

The new Phantasmic Slammer would own GROSS's but though. That's a fact :P
Team Ignition
Redline: Robot Bastards 1 LW champ
Pyrite: FRR Backlash LW champ
The Debilitator: Cherry Bomb Classic 1 LW champ
Sling Shot: Bot O' Rama 2016 Sportsman champ
Doomerang: Robot Fight Night HW champ

User avatar
Badnik96
Posts: 3983
Joined: Sun May 02, 2010 12:00 am
Location: somewhere in the plane of existence
Contact:

The Crash & Burn Tournament 5

Post by Badnik96 » Thu Apr 04, 2013 5:13 pm

Antweight: FireArrow
Image
Shape: See the pic, except a little smaller to fit into the cube
Colour: Black with a red arrow pointing down the wedge, "Team Ignition" decal at back
Weight: 150g
Armour: 1/16 in. thick 7075 T6 aluminum
Drive: 2x 33:1 Fingertech Silver Sparks
Power: E-Flite 430mAh 11.1V Triple Cell 3S LiPoly Pack
Motivation: 2x 2in tall Lite Flite wheels
Top Speed: 40-50cm/s
Ground Clearance: scrapes the floor at the front, 1 cm at back
Turning Circle: 0
Dimensions: 4in (back to front), 3.625in - 4in (Left to Right), 1.75in (Topmost point)
Weaponry: pushing power
Srimech: invertible
Team Ignition
Redline: Robot Bastards 1 LW champ
Pyrite: FRR Backlash LW champ
The Debilitator: Cherry Bomb Classic 1 LW champ
Sling Shot: Bot O' Rama 2016 Sportsman champ
Doomerang: Robot Fight Night HW champ

User avatar
BEES
Posts: 1857
Joined: Wed Dec 31, 1969 7:00 pm
Location: Durham, NC, USA

The Crash & Burn Tournament 5

Post by BEES » Thu Apr 04, 2013 9:15 pm

<blockquote class='quote_blockquote'><dl><dt>KodeBreaker</dt><dd>Apr 4 2013&#44; 09:52 AM</dd></dl><div> That'd be great too. I also still need some shit from Spatula. <_<

I know, I know. I keep forgetting too. >_< [/quote]
So apparently this is happening?

Uh, okay I'll get you two more thingies or whatever hang on. And I'll FRA the stats for them

User avatar
That Kode Guy
Posts: 9125
Joined: Wed Dec 31, 1969 7:00 pm
Location: Canada
Team: Dissonance-Tek

The Crash & Burn Tournament 5

Post by That Kode Guy » Thu Apr 04, 2013 9:50 pm

I thank you, but...

<blockquote class='quote_blockquote'><dl><dt>Spatula</dt><dd>Apr 4 2013&#44; 10:15 PM</dd></dl><div> So apparently this is happening? [/quote]
What's that supposed to mean? <_<
This account is in a state of dimensional flux

NWOWWE
Posts: 6889
Joined: Wed Dec 31, 1969 7:00 pm
Location: E-Town, PA
Team: Team Blood Gulch
Contact:

The Crash & Burn Tournament 5

Post by NWOWWE » Fri Apr 05, 2013 7:13 am

<blockquote class='quote_blockquote'><dl><dt>KodeBreaker</dt><dd>Apr 4 2013&#44; 10:50 PM</dd></dl><div> <blockquote class='quote_blockquote'><dl><dt>Spatula</dt><dd>Apr 4 2013&#44; 10:15 PM</dd></dl><div> So apparently this is happening? [/quote]
What's that supposed to mean? <_< [/quote]
Maybe he's being ironic? :v:
Area51Escapee,Jan 30 2011 wrote:
Spatula,Jan 29 2011 wrote: I should go 3-1 this week but it'll probably be something like 0-4 or 0-5.
It sucks going 0-5. You lose all 4 of your bot fights for the week and you also lose at life.

User avatar
Badnik96
Posts: 3983
Joined: Sun May 02, 2010 12:00 am
Location: somewhere in the plane of existence
Contact:

The Crash & Burn Tournament 5

Post by Badnik96 » Wed Apr 10, 2013 3:14 pm

OK, I'm replacing Mortician with Dark Byte.
Image

Shape: See the pic
Colour: Completely black with the drum being unpainted metal, ignore the grey lines on the pic
Weight: 54 KG
Armour: 1/4 in. thick titanium
Drive: 2x Whyachi TWM3R Gearboxes
Power: 2 x 12v 2400mAh NiCads in series for 24v
Motivation: Rubber tracks similar to El Diablo's, but with a triangular tread pattern
Top Speed: 11-12 MPH
Ground Clearance: 1cm, with the rear wedges being hinged
Turning Circle: 0
Dimensions: 70cm long, 55cm wide, 45 cm tall. 43cm drum.
Weaponry: Reversible Drum powered by a Perm 80 as well as a rear lifting arm powered by a pneumatic system similar to Tazbot's which can rotate 45 degrees in either direction
Srimech: invertible
Notes: Has an inversion switch to compensate for driver error when inverted
Team Ignition
Redline: Robot Bastards 1 LW champ
Pyrite: FRR Backlash LW champ
The Debilitator: Cherry Bomb Classic 1 LW champ
Sling Shot: Bot O' Rama 2016 Sportsman champ
Doomerang: Robot Fight Night HW champ

User avatar
Badnik96
Posts: 3983
Joined: Sun May 02, 2010 12:00 am
Location: somewhere in the plane of existence
Contact:

The Crash & Burn Tournament 5

Post by Badnik96 » Wed Apr 10, 2013 3:36 pm

DP

I also have a new FW in the works to replace Explosion
Team Ignition
Redline: Robot Bastards 1 LW champ
Pyrite: FRR Backlash LW champ
The Debilitator: Cherry Bomb Classic 1 LW champ
Sling Shot: Bot O' Rama 2016 Sportsman champ
Doomerang: Robot Fight Night HW champ

User avatar
GF93
Posts: 6142
Joined: Wed Dec 31, 1969 7:00 pm
Location: The Last Train To Clarksville
Team: Ice Cubed Robotics

The Crash & Burn Tournament 5

Post by GF93 » Wed Apr 10, 2013 5:06 pm

<blockquote class='quote_blockquote'><dl><dt>Badnik96</dt><dd>Apr 10 2013&#44; 03:14 PM</dd></dl><div> OK, I'm replacing Mortician with Dark Byte.
Image

Shape: See the pic
Colour: Completely black with the drum being unpainted metal, ignore the grey lines on the pic
Weight: 54 KG
Armour: 1/4 in. thick titanium
Drive: 2x Whyachi TWM3R Gearboxes
Power: 2 x 12v 2400mAh NiCads in series for 24v
Motivation: Rubber tracks similar to El Diablo's, but with a triangular tread pattern
Top Speed: 11-12 MPH
Ground Clearance: 1cm, with the rear wedges being hinged
Turning Circle: 0
Dimensions: 70cm long, 55cm wide, 45 cm tall. 43cm drum.
Weaponry: Reversible Drum powered by a Perm 80 as well as a rear lifting arm powered by a pneumatic system similar to Tazbot's which can rotate 45 degrees in either direction
Srimech: invertible
Notes: Has an inversion switch to compensate for driver error when inverted [/quote]
Nice, it's looking better already. Should be pretty awesome. :cool:
ICE³ ROBOTICS
"Tougher than a glacier, more might than an avalanche, more fury than a blizzard, and more burning passion than a volcano."

User avatar
That Kode Guy
Posts: 9125
Joined: Wed Dec 31, 1969 7:00 pm
Location: Canada
Team: Dissonance-Tek

The Crash & Burn Tournament 5

Post by That Kode Guy » Wed Apr 10, 2013 6:35 pm

Consulted with Joey (I'm not good at weight-checking stats for other-weights, sadly), and...

<blockquote class='quote_blockquote'><dl><dt>Quote:</dt><dd>&nbsp;</dd></dl><div>[7:25:42 PM] Joey McConnell: 1/4 inch...right
[7:25:50 PM] Joey McConnell: 6mm ish?
[7:26:19 PM] KodyK: slightly more I think (1 in = 2.54cm) but yeah
[7:26:45 PM] Joey McConnell: finding materials here in metric sizes is frustrating
[7:26:56 PM] Joey McConnell: I can cope with 0.51mm instead of 0.5mm though
[7:26:59 PM] Joey McConnell: but I digress
[7:27:31 PM] Joey McConnell: The gearboxes are just gearboxes and need a motor to move them (they're designed for either of the 3 inch diameter Mags)
[7:28:02 PM] Joey McConnell: I would go for the 150s as I am sensing weight problems
[7:28:25 PM] Joey McConnell: weight calculation time
[7:28:48 PM] Joey McConnell: chassis and armour: 25kg seems reasonable to support a spinning weapon and that much Ti
[7:29:02 PM] Joey McConnell: drive would be about 10kg, give or take
[7:29:18 PM] Joey McConnell: drum needs more detail but 15kg seems reasonable for that
[7:29:37 PM] Joey McConnell: and then you have 4kg for the pneumatics, electronics, and batteries
[7:29:59 PM] Joey McConnell: so my instincts tell me to get rid of the lifter as realistically it's unlikely to do much other than add complexity
[7:30:33 PM] Joey McConnell: If the drum's lighter than it looks then it'd be in weight (assuming the 150s) BUT then we have a bit of a problem
[7:30:49 PM] Joey McConnell: wait
[7:31:00 PM] Joey McConnell: rather a fucking lot of a problem actually, just reread the stats
[7:32:41 PM] Joey McConnell: mathematics time
[7:33:26 PM] Joey McConnell: what would you say the rough average current draw of two S28-150 Mags would be on 24v, bearing in mind that they are driving tracks which take a lot of power to turn compared to wheels?
[7:34:10 PM] Joey McConnell: and then what would you guess the current draw would be for a 4hp electric motor spinning up a drum?
[7:35:01 PM] Joey McConnell: and then he's running it on 2.4ah...I can't decide if a) the capacity or b) the maximum current those packs can provide is the bigger issue
if b) then it isn't unlikely that the robot could have a bit of a fire...[/quote]

:/
This account is in a state of dimensional flux

User avatar
GF93
Posts: 6142
Joined: Wed Dec 31, 1969 7:00 pm
Location: The Last Train To Clarksville
Team: Ice Cubed Robotics

The Crash & Burn Tournament 5

Post by GF93 » Wed Apr 10, 2013 7:24 pm

<blockquote class='quote_blockquote'><dl><dt>KodeBreaker</dt><dd>Apr 10 2013&#44; 06:35 PM</dd></dl><div> Consulted with Joey (I'm not good at weight-checking stats for other-weights, sadly), and...

<blockquote class='quote_blockquote'><dl><dt>Quote:</dt><dd>&nbsp;</dd></dl><div>[7:25:42 PM] Joey McConnell: 1/4 inch...right
[7:25:50 PM] Joey McConnell: 6mm ish?
[7:26:19 PM] KodyK: slightly more I think (1 in = 2.54cm) but yeah
[7:26:45 PM] Joey McConnell: finding materials here in metric sizes is frustrating
[7:26:56 PM] Joey McConnell: I can cope with 0.51mm instead of 0.5mm though
[7:26:59 PM] Joey McConnell: but I digress
[7:27:31 PM] Joey McConnell: The gearboxes are just gearboxes and need a motor to move them (they're designed for either of the 3 inch diameter Mags)
[7:28:02 PM] Joey McConnell: I would go for the 150s as I am sensing weight problems
[7:28:25 PM] Joey McConnell: weight calculation time
[7:28:48 PM] Joey McConnell: chassis and armour: 25kg seems reasonable to support a spinning weapon and that much Ti
[7:29:02 PM] Joey McConnell: drive would be about 10kg, give or take
[7:29:18 PM] Joey McConnell: drum needs more detail but 15kg seems reasonable for that
[7:29:37 PM] Joey McConnell: and then you have 4kg for the pneumatics, electronics, and batteries
[7:29:59 PM] Joey McConnell: so my instincts tell me to get rid of the lifter as realistically it's unlikely to do much other than add complexity
[7:30:33 PM] Joey McConnell: If the drum's lighter than it looks then it'd be in weight (assuming the 150s) BUT then we have a bit of a problem
[7:30:49 PM] Joey McConnell: wait
[7:31:00 PM] Joey McConnell: rather a fucking lot of a problem actually, just reread the stats
[7:32:41 PM] Joey McConnell: mathematics time
[7:33:26 PM] Joey McConnell: what would you say the rough average current draw of two S28-150 Mags would be on 24v, bearing in mind that they are driving tracks which take a lot of power to turn compared to wheels?
[7:34:10 PM] Joey McConnell: and then what would you guess the current draw would be for a 4hp electric motor spinning up a drum?
[7:35:01 PM] Joey McConnell: and then he's running it on 2.4ah...I can't decide if a) the capacity or b) the maximum current those packs can provide is the bigger issue
if b) then it isn't unlikely that the robot could have a bit of a fire...[/quote]

:/ [/quote]
Exactly why I don't think I'd be good for tallying up stats at all for this. I mean, I'm good at designing robots, but my engineering knowledge is a bit crap, to be honest. =/
ICE³ ROBOTICS
"Tougher than a glacier, more might than an avalanche, more fury than a blizzard, and more burning passion than a volcano."

User avatar
Badnik96
Posts: 3983
Joined: Sun May 02, 2010 12:00 am
Location: somewhere in the plane of existence
Contact:

The Crash & Burn Tournament 5

Post by Badnik96 » Wed Apr 10, 2013 8:13 pm

Well fuck. I guess most of swimm3r's bots are gonna blow up then, his stats are where I got the battery things from XD

Will have to revise things more I guess :P my FW shouldn't have any problems as I have lots of FW builders on GTM to consult.
Team Ignition
Redline: Robot Bastards 1 LW champ
Pyrite: FRR Backlash LW champ
The Debilitator: Cherry Bomb Classic 1 LW champ
Sling Shot: Bot O' Rama 2016 Sportsman champ
Doomerang: Robot Fight Night HW champ

User avatar
That Kode Guy
Posts: 9125
Joined: Wed Dec 31, 1969 7:00 pm
Location: Canada
Team: Dissonance-Tek

The Crash & Burn Tournament 5

Post by That Kode Guy » Wed Apr 10, 2013 8:32 pm

<blockquote class='quote_blockquote'><dl><dt>Quote:</dt><dd>&nbsp;</dd></dl><div>[9:04:05 PM] Joey McConnell: and in response to GF93, my engineering knowledge is crap too XD
[9:04:19 PM] Joey McConnell: my specialty, if it can be called that, is probably electrical
[9:05:42 PM] Joey McConnell: and even then it's questionable[/quote]

XD
This account is in a state of dimensional flux

Locked