Page 1 of 1

Team Toxic

Posted: Tue Sep 13, 2016 2:54 pm
by Toxic
So I found a few designs I made while under the influence of some devils tobacco, and along with getting some inspiration from Badnik and others, have made a few bots that I figured I would share.

Mind you, I am not really that creative so you won't be getting anything really crazy like Monsterworks or anybody else, and my cad skills are very limited since I use Tinkercad but I think I have made a few pretty interesting things.

My following posts will contain all my new bots. Feel free to criticize and offer suggestions. I will try my best to fix anything but no promises.

Team Toxic

Posted: Tue Sep 13, 2016 3:01 pm
by Toxic
First up is a pretty standard bar spinner that I seem to have colored similarly to the original Power Bar from CFRC 1, so I reckon I will call it Power Bar V2.5(Lets just not think about the abortion of a design I made for Ruination back last year, haha)

Rear hinged wedges, invert-able, spikes on the side to prevent pulling an Ankle Biter.

Speed: 5
Traction: 3
Torque: 1
Weapon: 14
Armor: 7

Image

Team Toxic

Posted: Tue Sep 13, 2016 3:02 pm
by That Kode Guy
Edited your post so the image would show up. :v:

Also, that bar isn't going to work at all. :P

Team Toxic

Posted: Tue Sep 13, 2016 3:05 pm
by Toxic
Next we have....something. So I'm pretty sure this was meant to be a hybrid flipper or undercutting hammer bot or something. I think the purple center bar spins, which will then hit the opponent really hard. I also found a configuration with a flipper on it, so I reckon that could work too. This is probably a work in progress and I honestly have no idea what to think of this design.

This bot has no name right now.

Speed: 6
Traction: 4
Torque: 3
Weapon: 10
Armor: 7

Image

Team Toxic

Posted: Tue Sep 13, 2016 3:06 pm
by Toxic
<blockquote class='quote_blockquote'><dl><dt>KodeBreaker</dt><dd>Sep 13 2016, 03:02 PM</dd></dl><div>Edited your post so the image would show up. :v:

Also, that bar isn't going to work at all. :P[/quote]Yeah I realize most of these aren't effective at all, and that most of them will not work but I just figured I made some stuff so I might as well share it.

Team Toxic

Posted: Tue Sep 13, 2016 3:13 pm
by Toxic
And finally, the only design that I am even halfway happy with, is The Raven V2. Badniks newest bot gave me inspiration to try to make a better plow than what the Pressure Drop Raven had, and even though it's not the best, I think it looks a heck of a lot meaner than V1. The lifter is no more, but with that comes a better drivetrain and armor. The back now has the Underall wedges on it to help incase the bot gets inverted. Purple spikes on the top of the plow are there to help with keep opponents on the plow instead of popping up and over the plow. 12 wheels as always so it can take a beating and keep on ticking. Please excuse the way tinkercad intersects shapes and just imagine everything being solid and shit. :V

Speed: 8
Traction: 6
Torque: 4
Weapon: 0
Armor: 12 (+3 to the front plow)

Image

Team Toxic

Posted: Tue Sep 13, 2016 3:49 pm
by Deleted User
looks in lots of ways better to me.

Team Toxic

Posted: Tue Sep 13, 2016 3:53 pm
by Venice Queen
the spinner robot is too short in general for the size of blade it has, and as kody mentioned, it will also not work at all :v:

not sure what's goin on with unnamed, really... I imagine if you took out the silver plate you could transform it into a somewhat decent vertical spinner

Raven 2 is badass

Team Toxic

Posted: Tue Sep 13, 2016 4:02 pm
by Toxic
<blockquote class='quote_blockquote'><dl><dt>The_Angry_Goat</dt><dd>Sep 13 2016, 03:53 PM</dd></dl><div>the spinner robot is too short in general for the size of blade it has, and as kody mentioned, it will also not work at all :v:

not sure what's goin on with unnamed, really... I imagine if you took out the silver plate you could transform it into a somewhat decent vertical spinner

Raven 2 is badass[/quote]1. Yeah, I need to increase the length, for sure. I didn't like it in the first place. To clarify though, the blade is supposed to go through the chassis....as in their is an opening in the center, but I just haven't gotten around to making it yet.

2.I feel you on the unnamed bot. I'm not too sure what inebriated me was getting at there. Definitely gonna improve that one at one point.

3.The Raven V2 is the one I am most proud of. I know the TinkerCad render isn't the best, but it shows what I'm getting at pretty well. I fully expect that design to compete for a championship whenever I decide to enter him(probably next summer on Reddit if I'm being honest)

Thanks for the feedback bro.

Team Toxic

Posted: Tue Sep 13, 2016 4:09 pm
by Venice Queen
height more than length was what I meant when I said too short btw, though it could do with being a bit wider as well. shoulda made that clearer :v: