Page 11 of 14

Team Obscure

Posted: Tue Feb 17, 2015 8:33 pm
by GF93
Schweet. I like the design of the scoop on the back.

Team Obscure

Posted: Wed Feb 18, 2015 7:30 am
by Mystic2000
Image

Made a couple tweaks to WarWolf 2 s'Front end, including a bigger flipping panel and sloped sides on the front wedges

Team Obscure

Posted: Wed Feb 18, 2015 5:48 pm
by playzooki
nice

Team Obscure

Posted: Fri Feb 20, 2015 8:23 am
by Mystic2000
After Warwolf it is time for my FFR LW to be redone, the Gaia Hammer has been reforged and is ready to strike the oppsition again:

Image

new hinged wedges at the front, plenty of slopes, spiked hammer, hinged dustpan, i think that should be good to go

the only issue i may still have to fix is to make the hammer a bit longer

Team Obscure

Posted: Fri Feb 20, 2015 8:32 am
by NWOWWE
So that's a double sided hammer right? I'm guessing that's what the dustpan in the back is for. In which case you could probably afford to expand that dustpan a bit since not many bots are going to fit in a narrow one like that. :cool:

Also, a spinner is going to eat those front teeth wedges for breakfast so you might want to consider something a bit bulkier on one side of the bot so you don't have corners getting ripped apart everywhere. ;)

Team Obscure

Posted: Sat Feb 28, 2015 3:55 pm
by Mystic2000
heh, i'm back with another bot, also i heard GF loves undercutters, so here, have one:

Image

heh, here is payback for all those taunts you thrown at me, anyway, undercutting disc, back hinged wedges, 2WD, inverible, act as overcutter if flipped over, ready to sink Dreadnoughts, tear up Marauders, conquer Conquerors and throw Masters of Puppets off their thrones, and no Black Mamba is gonna save you from this one

named after BRVR, a creepypasta Pikachu who had gone psycho after he was abandonned by his owner for years, and ended up slaughtering all Pokemon present and the world he lived in and transformed it into an hellish version of it.

so yeah GF; have fun with that one

Team Obscure

Posted: Sat Feb 28, 2015 4:13 pm
by NFX
Wedges are a little bit small at the back, but aside from that, it should be pretty effective. Nice work.

Team Obscure

Posted: Sun Mar 01, 2015 10:44 am
by GF93
<blockquote class='quote_blockquote'><dl><dt>Mystic2000</dt><dd>Feb 28 2015, 03:55 PM</dd></dl><div>ready to sink Dreadnoughts, tear up Marauders, conquer Conquerors and throw Masters of Puppets off their thrones, and no Black Mamba is gonna save you from this one[/quote]Ooh shit everyone, Glass Joe is mad at me. I'm so scared, Glass Joe wants to destroy me&#33; Glass Joe is going to get me, don't let Glass Joe come after me, he's so big and strong and downright terrifying&#33; Protect me from Glass Joe, we all know how much of a badass he is. :dawg:

That aside though, the designs themselves look pretty good. I particularly like the new Gaia Hammer- it reminds me a lot of the current Thor. If you rounded off the front corners (Ala Mamba's skirts.) so that Spinners can't catch onto them, I reckon you'll have quite a good Hammerbot there. BRVR looks pretty decent as well. As Nick says, maybe make the rear wedges bigger and spread them out along the back so that they have more range and stuff.

Team Obscure

Posted: Fri Mar 06, 2015 10:02 am
by Mystic2000
Starting to use Rhino 2 as my Rhino 5 Trial is almost out ogf saves (well i still got 9 left), here are the first 3 bots i made with it:

Nitrax:

4wd drumbot flanked by 2 hinged wedges and a back shock-mounted plow to deal with spinners

Image

Swesson:

Image

Axebot with a nice big shock-mounted plow at the front, the axe can rotate 180

Team Obscure

Posted: Fri Mar 06, 2015 10:05 am
by That Kode Guy
Not bad. I like Swesson the most

Team Obscure

Posted: Fri Mar 06, 2015 10:12 am
by NWOWWE
I think Final Judgement would be a bit better served if you could attach something to the head of the puncher and not just have it as a flat end.

Team Obscure

Posted: Fri Mar 06, 2015 10:25 am
by That Kode Guy
<blockquote class='quote_blockquote'><dl><dt>NWOWWE</dt><dd>Mar 6 2015, 10:12 AM</dd></dl><div>I think Final Judgement would be a bit better served if you could attach something to the head of the puncher and not just have it as a flat end.[/quote]he'd have to get Mr. AS' permission first :v:

Team Obscure

Posted: Fri Mar 06, 2015 10:28 am
by NWOWWE
Oops... is what happens when I miss my morning coffee. :v:

Team Obscure

Posted: Tue Jul 21, 2015 3:44 pm
by Mystic2000
So yeah, been thinking of an entry for that Reddit tourney and have been always thinking of rebooting the original Golden Blaze design

Image

Here is Aerogis, bar spinner with 2 undercutting blades and 2 anti hammer ones, also has 2 chassis teeth for twacking, also sloped chassis so spinners don't beat his ass as easy

Team Obscure

Posted: Tue Aug 25, 2015 1:18 pm
by Mystic2000
a month since last update ? not too bad, anyway have 2 bots:

BRVR 3: Image

Fixed the narrow wheelbase problem

Aegis:

Image

IF i ever make a real robot, i will be this one, i'm probably gonna aim for antweight tho no matter what i end up creating, so yeah, wedged front end and hinged tail at rear to thwack, also wheelguards so i don't have to take over 9000 spare wheels with me at every event i go to