Petaflare | Terminating Cutter Gen III |
---|---|
Speed: 5 | Speed: 4 |
Traction: 4 | Traction: 3 |
Torque: 1 | Torque: 1 |
Weapon: 11 (10 crusher, 1 srimech) | Weapon: 14 |
Armour: Armour: 8 (+2 wedge) (Effective 10 on crusher, 14 on wedge) | Armour: 7 |
Play the match aggressively. Get out there ASAP, and either have a go at baiting them into smacking a wall or letting us get around their side, or just plain tanking the blade on our wedge. If we're tanking the hit, keep it to the 14 armour part. The crusher tower itself can probably take the hit, but we'd rather not tempt fate. Either way, once the blade's slowed, bulldoze them into a corner and crush away. Ideally we'll lock onto the squishy red bits and mangle it there, but warping the frame that holds the blade enough for it to not spin up or to dislocate the chain is also cool. Keep the pin as much as possible, and once we have to let go, keep harassing them to prevent the spinner from getting back up to speed. Utilise the arena as best as we can. Why not see if Termy can deal with being struck with a mallet and a crusher at the same time? Keep an eye out for any jank he tries, like baiting us into going for a hit on the side before turning and cracking the blade into our side. If they try it, pivot into the blade as best as possible so it plinks off of our armoured parts. Ideally, the most hits he'll get in is one, and then for the rest of the match he's spun down.
In summary, stop the blade or otherwise avoid it so we get a hit in, then continue the match Razer style. :P
Best of luck to the opponent.