ROBOT2 MW QFs - Frogbot vs Outrage

This is the forum where you will role play for any fantasy leagues going on at the time.

Moderator: Trihunter

Post Reply
Wolf51-50
Posts: 658
Joined: Wed Dec 31, 1969 7:00 pm
Location: Somewhere in the USA

ROBOT2 MW QFs - Frogbot vs Outrage

Post by Wolf51-50 » Mon Nov 05, 2018 12:13 pm

OnO

Well let's see here. He has a somewhat decent chance of flanking me. He can also jam my blade into me because everyone is writing Outrage as having noodle limbs or something lol. Well guess what? I'm starting inverted :V

I have +4 on his flipper and +6 everywhere else. With my blade also thinnish and gray, how the fuck is he gonna be able to see that when it's spinning at full speed? More importantly, he's probably gonna try to flank me. If he can't see my blade and comes at me at an angle, that side is gonna disintegrate in seconds. Advance towards the center so I'm up and away from the walls. If he's prolly gonna flank, turn both treads on the spot so I stay in one place while keeping myself from being wedged. Keep that blade relatively in front of him and DO NOT let him get any access to the sides. If he's probably gonna catch up to my tread as I turn in place, switch it up and only turn the tread he is aiming for backwards and away from the wedge. In other words, move from turning in place to making a sudden left (or right) turn right after. He won't expect it, and he'll drive himself right into the blade.

Is he charging right at the blade? Bring it the fuck on. Just make sure I'm somewhat away from the walls. He's either taking out his 10 armor side or twisting his flipper sideways.

Wedged? The spinner will send me flying up and away so I can buy time for more spin up. He also has to line that tiny little wedgelet up when there's very little surface for him to take advantage of in the first place

Be aggressive af. Really try to not get flipped over.

Good luck!

Wolf51-50
Posts: 658
Joined: Wed Dec 31, 1969 7:00 pm
Location: Somewhere in the USA

Re: ROBOT2 MW QFs - Frogbot vs Outrage

Post by Wolf51-50 » Fri Nov 09, 2018 11:22 am

*edited to fix a vital spelling error. Apologies*

User avatar
attackfrog
Posts: 321
Joined: Wed Dec 31, 1969 7:00 pm
Contact:

Re: ROBOT2 MW QFs - Frogbot vs Outrage

Post by attackfrog » Sat Nov 10, 2018 11:33 pm

This is an Outrage! There is no room for weapon motors in this thing, and hardly any room for anything else either! Shenanigans! Bah, humbug! Harrumph!

On the plus side for me, however, it's got practically no driving control, and once I get up in its face it's not going to be able to spin up that long-ass bar again. Overcutter or undercutter, it's the same case either way. So that's what I'm going to do: box rush the F out of Outrage at the buzzer, stop the blade with my face, and keep it stopped. From there, I'll start pushing it towards the wall. It'll likely try to squirm away, but I'll turn with it and just keep pushing until we end up at a wall somewhere. Then I'll try to flip it out of the arena. I may not succeed, what with its weird shape, but it'll at least look good and Outrage isn't going to be able to escape me even if I do.

I'll likely take a bit of damage in my initial rush to stop that blade, but it shouldn't be too much and it definitely won't be enough to disable me before I can push in and stop the blade. I'll be able to control the match from there.

Good luck again, Wolf!
Aquatic Robotics
R.O.B.O.T.S. II - Buzzcut (FW: 6 - 1 & Finalist) / Splashdown (LW: 4 - 3 & Finalist) / Frogbot 2000 (MW: 6 - 1 & Finalist) / Boy Flaily (HW: 4 - 3) || (Entry Post)
Ruination IV: The Upheaval - Pinstripe (LW: 4 - 3) / The Maw (MW: 3 - 4) / Sinmill (HW: 4 - 3) / Speed Bison (SHW: 8 - 1 and in the finals!) || (Entry Post)
RoBattle - The Gourmet (LW: Finalist) / Hercules (HW: Finalist) || (Entry Post)

[attackfrog on Sketchfab] | [The Ruination IV Visual Guide] | [The REDDIT Visual Guide]

Post Reply